2021-09-26 Yesterday Graeme came up with a plan!
We used thin masonite board to block the sharp edges and also block the bricks.
The masonite was wet down and bent to shape and allowed to dry. Not as easy as it looks.
We then need to attach the masonite to the brick piers and when they dry there to the wall under the windows.
After gluing the bent pieces to the bricks they will be attached to the frame (top level) or glued to the wall on bottom level.
After that, cut to fit flat masonite between the piers. Might have to paint these sky blue before I glue them in place. Graeme wants the side edges beveled to allow the joins to be filled. Now all we need do is work out which glue to use?
Cheers
Rod