2019_08_01 Building new station.
The new station is a typical Victorian Country terminus with enough industry to make it busy.
It is supposed to be a dead end (end of line) station which was built after the branch was commissioned, to serve a new population of WW1 veterans who were helped to settle the land after returning from Europe in 1918.
And so coal (later briquettes) grain, fuel, animal and general goods facilities were provided.
As well a passenger service operated twice a day, morning and night. In later years a rail motor service was added during the day to allow shopping trips to the nearest large town. Really a very busy little terminus which survived the steam era unlike so many of its sister towns.
And so construction begins. I thought I could build a curved station on top of a round helix ??
However this is turning out more difficult than I could have ever imagined.
The Helix is designed to carry three tracks 46", 44" and 42" inch radii.
It seems that the branch will need a minimum radius of 36" (or less) I really do not want less. So here we are trying to fit it all in, not very well I am afraid to say.
The inside track will be the platform road with No 2 tk an arrival road, no 3 track storage and No 4 the goods shed.
No 2 track will connect back to the grain silo area which is a branch of the main along the western wall. This will form a reverse loop and will be hidden and only be used when insufficient operators are available to man the yard.
So some pictures... (as usual)
Although not supposed to be running on BG it was the only train I had to test the new track :D
Just need to power the points.
Testing out ideas for the valence
I don't like the wide board to the right. I think it will look better to use the two boards?
and thus here lies the problem bringing both sides together without complicating the platform or going below 36" radius.
The silo area is branching of the main along the western wall.
Peco curved points are part of the problem. Although the sharp inner radius is actually helping here.
Outside radius 46" and that will not work.
Inside radius is roughly 36" and when fixed down should work?
Complicated join of each end..Today we will have to adjust it to make it work.
Cheers
Rod and Al.
2019/08/03
2019/07/22
2019_07_22 Diddling about....
2019_07_22 Two days in a row tried to complete wiring of helix..distractions?
Well I bought this and it wasn't cheap. It is a very heavy 4 wheel wagon with both axles suspended on a phosphor bronze spring, which allowed it to rock front to back.
So much so that KD's simply uncoupled, and made it difficult to tow or even push around.
So I decided to fix it!
Too cold to go and get better pictures :( But here you see the wagon sitting low on left side. Push it down on right side and it will also stay down. Not a really suitable vehicle for my purpose.
It is all glued together and is brittle, and I had to drill out the axle keeper to remove the wheels. I did it wong. I should have glued the coupling bars in first, making sure the vehicle sat flat on its 4 wheels and the coupling bars were horizontal. Once the bars were dried, I glued styrene extensions to the coupling bar long enough to fit KD's to ends and sit on two SEM trucks which supported the device exactly as high as the original two axles did, thus applying correct pressure on the sanding disk, or the polishing disk fitted to the vehicle. I did it the hard way, but eventually got there.
Used gorilla glue as it sets hard and expands to fill all gaps. I just need to cut away excess and lightly sand before painting. Notice the coupling on left dropped. Easy enough to fix.
I used U section styrene which was two light and allowed body to sag. So I filled the U section with Gorilla glue which stiffened it up. It does not bend now.
.
Just needs filing and cleaning up of the U beams where gorilla glue expanded. the wagon is now stable and exerts a solid pressure on rail. Might have to remove a weight or two, as a 442 had trouble pushing it. This is the third vehicle in my maintenance train.
I have a Roco/Atlas powered Track cleaner that power vacuums the track, washes it with solvent or polishes the rail packed away.. and as well.....
This DCC controlled scrubber fitted with spinning polishing wheels. The wheels spin in opposite directions which powers it along slowly, and it does a good job.
Cheers
Rod
So much so that KD's simply uncoupled, and made it difficult to tow or even push around.
So I decided to fix it!
Too cold to go and get better pictures :( But here you see the wagon sitting low on left side. Push it down on right side and it will also stay down. Not a really suitable vehicle for my purpose.
Used gorilla glue as it sets hard and expands to fill all gaps. I just need to cut away excess and lightly sand before painting. Notice the coupling on left dropped. Easy enough to fix.
I used U section styrene which was two light and allowed body to sag. So I filled the U section with Gorilla glue which stiffened it up. It does not bend now.
.
Just needs filing and cleaning up of the U beams where gorilla glue expanded. the wagon is now stable and exerts a solid pressure on rail. Might have to remove a weight or two, as a 442 had trouble pushing it. This is the third vehicle in my maintenance train.
I have a Roco/Atlas powered Track cleaner that power vacuums the track, washes it with solvent or polishes the rail packed away.. and as well.....
This DCC controlled scrubber fitted with spinning polishing wheels. The wheels spin in opposite directions which powers it along slowly, and it does a good job.
Cheers
Rod
2019/07/20
2019_07_20 Back from Hols and into it (intuit)
2019_07_20 Who turned the sun off... brrrrrrrr....
I started a project which was definitely overkill and a waste of good wire! However I used what I was overstocked with and I am sick and tired of wiring errors on the helix. This will fix it, however it is ugly, but on the other hand, it will be covered and should not be in normal view.
WIRING THE HELIX
Some pictures
Hot glue is simple way of holding it in place, its messy though but cleans up easily. You can even adjust it by heating it up again with glue gun. Older areas have held firm for about 8 years.
NSW Locomotives returned from NARARA shops
Trainorama 32 Class
This one was bought second hand from England and had Tsunami 2 fitted and all the driver tires had fallen off. All repaired or installed by Gerry Hopkins
Right train in wrong place. Very pleased with this one which will add to a 70's era Albury under construction (yes it is under the branch line presently being built by Al and I :D )
Austrains 30 Class
This little engine has a big heart and pulls better than the prototype on 2% grades.
I will make a couple of videos today so you can hear them wheel slip up the hill :)
"Al"day on Friday
Back into branch line. Thought we would pretty it up before Graeme asked us to :D
So departs the Honeysuckle station past the turntable and heads towards the Terminal Station at end of line.
Track roughly laid in place to see how it might look. We think a high ground extends where the track almost meets the wall. This will represent a cutting with clay verticals and then flat farmland on the edge closest to walkway.
Home departure just beyond turntable with arrival just this side Distant just in from left hand side of picture.
The track levels just before the points which lead to a terminal station on a bend. Should be able to fit an nice working yard here with coal/ briquette yard, grain silos Fuel depot and stock race.
Trains will be able to run round the back and re enter the main. This will be disguised to represent something like a dairy or meat works or maybe both?
And so time table operations will see the reverse loop out of use. The turntable will need to be accessed at Honey Suckle which was the Terminus before line was extended to new station.
And so operations will see the shed crew take the engines back to Honeysuckle for turning and in readiness from next days operations.
The hill is slightly more than 2% gradient both sides and the climb is about 2m. Should still manage a nice size train,
Cheers
Rod and Al
I started a project which was definitely overkill and a waste of good wire! However I used what I was overstocked with and I am sick and tired of wiring errors on the helix. This will fix it, however it is ugly, but on the other hand, it will be covered and should not be in normal view.
WIRING THE HELIX
Some pictures
Hot glue is simple way of holding it in place, its messy though but cleans up easily. You can even adjust it by heating it up again with glue gun. Older areas have held firm for about 8 years.
NSW Locomotives returned from NARARA shops
Trainorama 32 Class
This one was bought second hand from England and had Tsunami 2 fitted and all the driver tires had fallen off. All repaired or installed by Gerry Hopkins
Right train in wrong place. Very pleased with this one which will add to a 70's era Albury under construction (yes it is under the branch line presently being built by Al and I :D )
Austrains 30 Class
This little engine has a big heart and pulls better than the prototype on 2% grades.
I will make a couple of videos today so you can hear them wheel slip up the hill :)
"Al"day on Friday
Back into branch line. Thought we would pretty it up before Graeme asked us to :D
So departs the Honeysuckle station past the turntable and heads towards the Terminal Station at end of line.
Track roughly laid in place to see how it might look. We think a high ground extends where the track almost meets the wall. This will represent a cutting with clay verticals and then flat farmland on the edge closest to walkway.
Home departure just beyond turntable with arrival just this side Distant just in from left hand side of picture.
The track levels just before the points which lead to a terminal station on a bend. Should be able to fit an nice working yard here with coal/ briquette yard, grain silos Fuel depot and stock race.
Trains will be able to run round the back and re enter the main. This will be disguised to represent something like a dairy or meat works or maybe both?
And so time table operations will see the reverse loop out of use. The turntable will need to be accessed at Honey Suckle which was the Terminus before line was extended to new station.
And so operations will see the shed crew take the engines back to Honeysuckle for turning and in readiness from next days operations.
The hill is slightly more than 2% gradient both sides and the climb is about 2m. Should still manage a nice size train,
Cheers
Rod and Al
2019/05/30
2019_05_30 RUB Cars and another "AL-Day"
2019_05_30 On Wednesday I was able to pick up my newest Auscision production!
Saw a nice review by Rob Nesbitt here so check it out https://buildingwagga.blogspot.com/
Neatly packed and very secure as we expect from Auscision.
The six car set as run through Albury Wodonga 70's and 80's
Very clean crisp decals
several cars had pick ups to operate tail lights. very subdued and just exactly correct in my opinion.
The six car set came with extended couplers for minimum radius operations. So far I have not worked out what the bits in top pockets are. Very top is Intercapital Daylight signs. I think the middle are buffers and diaphragm bits?
I built my set up with an extra two cars, and decided to add candy cars as my era saw the changes coming in.
Extra couplers and ? for candy cars
Don't remember if they ran louvre vans on the thru trains, but what the heck :)
Thursday work day
Ok Al and I got back into the swing of things and finally completed the baseboards for the whole branch. And so we are now connected to helix. connected the helix into the system. This has taken so much time but we were really excited that the next phase will be to lay track into the Branch terminus on top of the new helix.
I rebuilt the top deck allowing me to cut off 450mm from the horizontal supports, making that mistake a little less obvious. Albury yard now will not sit in the shadows ;)
It will only be a single line, however its just wide enough to include scenery, perhaps an s bend snaking through a cutting? A small hill? a culvert or two? Ha Ha Graeme is getting to me :)
All baseboard cut and ready to glue and screw. I will install wiring first.
Here Al checks my measurements. And why wouldn't he Ha ha
Thats enough for now, and I am taking a short break for the next several weeks.
Cheers
Rod
Saw a nice review by Rob Nesbitt here so check it out https://buildingwagga.blogspot.com/
Neatly packed and very secure as we expect from Auscision.
Very clean crisp decals
several cars had pick ups to operate tail lights. very subdued and just exactly correct in my opinion.
The six car set came with extended couplers for minimum radius operations. So far I have not worked out what the bits in top pockets are. Very top is Intercapital Daylight signs. I think the middle are buffers and diaphragm bits?
I built my set up with an extra two cars, and decided to add candy cars as my era saw the changes coming in.
Extra couplers and ? for candy cars
Don't remember if they ran louvre vans on the thru trains, but what the heck :)
Thursday work day
Ok Al and I got back into the swing of things and finally completed the baseboards for the whole branch. And so we are now connected to helix. connected the helix into the system. This has taken so much time but we were really excited that the next phase will be to lay track into the Branch terminus on top of the new helix.
I rebuilt the top deck allowing me to cut off 450mm from the horizontal supports, making that mistake a little less obvious. Albury yard now will not sit in the shadows ;)
It will only be a single line, however its just wide enough to include scenery, perhaps an s bend snaking through a cutting? A small hill? a culvert or two? Ha Ha Graeme is getting to me :)
All baseboard cut and ready to glue and screw. I will install wiring first.
In background you can see two 50 inch radius curved boards clamped together? We used this to prove the curve to the left into the Terminus Station. The platform will sit along side a 46 inch radius S Curve, and should look interesting. The track runs towards display case and runs around top of helix into station. Several roads will be laid out servicing service pit, coal stage, water facilities as well as a Goods Shed, Silo, Briquettes and Super siding. Have I room for a fuel depot?
Screwed and glued with the outrigger cut back. Its very solid and would support my weight Ha Ha
Here Al checks my measurements. And why wouldn't he Ha ha
Thats enough for now, and I am taking a short break for the next several weeks.
Cheers
Rod
2019/05/27
2019_05_27 Sound install B Class continues
2019_05_27 Al's B Class
So we finally worked out that Al's B Class was defective. I built another B up using a similar sound chip and speaker, and Al took them both home to test. The original kept derailing, and the new one ran just fine, apart from having working marker lights but no headlight.
So I lifted off the body and swapped it with Al's and put the faulty chassis into the parts bin. I bought a few cheap B's for parts and put them into service, because they appeared just fine. So parts are a good thing, just in case :D
When I had the top off, I tried to find out why the headlights were not working. I started to think about the switch in the fuel tank, and what it did? Of course it turned off the headlight. So I shorted out the plug and got headlights. The male plug is fitted to the socket without wires shown here.
Closer up. I need to permanently join these together.
Quickly solder the plugs (wires had been cut off neatly leaving the crimped connectors inside) I released the connectors with a hobby knife and slightly pushed them out with some piano wire.
And while I was here, I took a shot of the space I created to snug down a full sized Version 4.0 decoder on board. The wire bridges were formed by soldering in the ends of resistors after snipping away the green parts at L1 and L2 The Capacitor C1 was also cut out, but not bridged with wire.
The decoder now snugs down another 4 mils and the roof fits on without touching ;)
W Class more coming soon.
New speakers arrived, however I ordered wrong size speaker boxes. Re-order soon.
I am the King of messing wiring! maybe these clips will help?
I have seen these before (on Honeysuckle) But they were stickons, and the wood was not a good surface to use them.
These clips cost $9 for 300 on ebay (45c each in Australia)
You screw them where you want them, and fix your wires in position with a short plastic tie!
How easy is that... Yeiii no more hanging wires, I hope.
Cheers
Rod
So we finally worked out that Al's B Class was defective. I built another B up using a similar sound chip and speaker, and Al took them both home to test. The original kept derailing, and the new one ran just fine, apart from having working marker lights but no headlight.
So I lifted off the body and swapped it with Al's and put the faulty chassis into the parts bin. I bought a few cheap B's for parts and put them into service, because they appeared just fine. So parts are a good thing, just in case :D
When I had the top off, I tried to find out why the headlights were not working. I started to think about the switch in the fuel tank, and what it did? Of course it turned off the headlight. So I shorted out the plug and got headlights. The male plug is fitted to the socket without wires shown here.
Closer up. I need to permanently join these together.
Quickly solder the plugs (wires had been cut off neatly leaving the crimped connectors inside) I released the connectors with a hobby knife and slightly pushed them out with some piano wire.
And while I was here, I took a shot of the space I created to snug down a full sized Version 4.0 decoder on board. The wire bridges were formed by soldering in the ends of resistors after snipping away the green parts at L1 and L2 The Capacitor C1 was also cut out, but not bridged with wire.
The decoder now snugs down another 4 mils and the roof fits on without touching ;)
W Class more coming soon.
New speakers arrived, however I ordered wrong size speaker boxes. Re-order soon.
I am the King of messing wiring! maybe these clips will help?
I have seen these before (on Honeysuckle) But they were stickons, and the wood was not a good surface to use them.
These clips cost $9 for 300 on ebay (45c each in Australia)
You screw them where you want them, and fix your wires in position with a short plastic tie!
How easy is that... Yeiii no more hanging wires, I hope.
Cheers
Rod
Subscribe to:
Posts (Atom)


















































