2021_10_09 OK need to cross SG trains here!!
Too many trains and not enough storage ;)
Aim today was to get a loop in and running. However I ran out of energy and light about the same time.
2021_10_09 OK need to cross SG trains here!!
Too many trains and not enough storage ;)
Aim today was to get a loop in and running. However I ran out of energy and light about the same time.
2021-10-05 I purchased these three V cars from Allan Curtis.
Allan does some nice stuff, and you should get on his mailing list if interested.
2021-09-26 Yesterday Graeme came up with a plan!
We used thin masonite board to block the sharp edges and also block the bricks.
The masonite was wet down and bent to shape and allowed to dry. Not as easy as it looks.
We then need to attach the masonite to the brick piers and when they dry there to the wall under the windows.
After that, cut to fit flat masonite between the piers. Might have to paint these sky blue before I glue them in place. Graeme wants the side edges beveled to allow the joins to be filled. Now all we need do is work out which glue to use?
Cheers
Rod
2021-09-21 Coal siding LED's are detaching and starting to hang down
And today one string shorted out. I removed the block connectors and fitted male and female spades. I san hot glue these to the frame and take a little pressure off the LED strips. I cant hot glue the strips on as the leds don't like the heat.
The problem is that I am not able to twist my old body into spots I could reach only a few years back. Wish I had done a better job then :(
For me, useless. Seem to be built for a show case! Fortunately with the help of a washer, these Auscision bogies work really well. I could not keep the axles in place, but now a small push and the coach goes half round the layout! Well almost. Got to a hill and returned back to where I pushed it from.
Height right up next to a Powerline new series car. Happy with that.
This old body needs a lot of help getting underneath the boards. Even a year ago I could have leaned under. But not today.
The lamp? the lamp? Turn it on champ!!
Dimmer switches.
Next job will be to sort this all out. Main problem is the 4.03 AMPS. Even with all locos off track, it draws a lot of power. I think it might be the TAM Valley singlet switches, but I need to sort that out.
The blue meter is the fernleigh circuit with 16 Singlet switches and drawing 1.38 amps.
The Red Ramp Meter supplies total power 8 amps. Circuit breakers are reliable now too.
Cheers
Rod
ps fixed the BG video by removing the duplicated part,
2021_09_18 Running two different SOP's One for 60's and one for 90's
2021_09_14 Representing thru running between Sydney and Melbourne prior to 1980
Cheers
Rod
2012_09_12 Life goes on.
So lock down is over for now. Not sure how long that will last as the government seems to really enjoy their new jack boots.
However I have noticed so many folk are fairly depressed here in this country, and so I guess am I, as well
May God bless us all, and I pray that this will all finish sooner rather than later.
My layout is running fairly well. I have a few dead spots and a little derailing happening. In general I run a train and when it stops, I find out why, fix the problem and keep moving around the layout.
Sometimes its the rolling stock, sometimes the track, and fairly rarely these days, the wiring. Its a lot of fun, being able to operate the railway, however much better with friends around to enjoy it and the company.
I am presently upgrading old Powerline coaches. I am replacing the bogies and attaching them with screws after filling the large holes and drilling out the filler after filing everything neatly.
As well I tossed the useless brass bogies under an expensive brass coach, They would not run 6 feet without derailing. And so I replaced them with Auscision commonwealth bogies. tested the coach by lightly pushing it on the flat and it went 21 meters stopping only on the grade, and then returning to me within inches from whence it started. Never seen such a thing. Probably the weight? But I am now working on some original (powerline) S cars and same bogies. Interesting to see how they roll.
Anyway, I am enjoying the job, so must get back to it.
Cheers all and Happy Railroading :D
Rod
Tuesday August 03_2021 Testing the second Eureka R
When you click on video you can enlarge it and when you go to You Tube you can select HD.
Cheers
Rod
2021-08-02 Monday Testing a modified Eureka R Class.
Have two Eureka R Class and f you have the smallest grade on your railway, they are about useless. Maybe decorate your display case if you can afford to.
However along comes a friend who has a solution. Thanks to Mark Laidlay, and just under 10 grams of lead sheet around the motor and above the drivers, we have two very useful engines! Thanks Mark.
Cheers
Rod
2021_07_13 47 very heavy bogies up the helix (Video)
Still uploading! A bit slow today.
Cheers
Rod
2021 06 30 Painting the valences and more electrical probs.
2021_06_25 Graeme adds to the scenery.
Cheers
Rod