2016_09_06 Little jobs and big wins

2016_09_06  Track Gangs deployed.

First Job! Mechanical engineer has been pondering the operation of the scharfenberg coupler system in HO because of the immenent arrival of the Sprinters from major supplier On Track.

Because of unreliability problems we have purchased a quantity of  1mm thick, 2mm diam. rare earth magnets. They are small enough to drill out the couplers and fit inside  couplings supplied by On Track. They will create a problem, because North and South poles need to be set to attract and thus hold the coupling together. This will mean that the cars cannot be coupled No 1 end to No 1 end, or 2 to 2.
As it turns out the cars operate this way anyway. V/Line never turn them, they always couple this way, and so will we.

The top coupler will have the magnets fitted to keep the powered cars together.

The 500 magnets sourced from Sydney on EBay.

My camera needs replacing. No longer focusing properly. These things are 2mm by 1mm thick.

Second Job for day (after packing car) was track repair.......

 Lining up the prefabricated points

Clearing away the rubble .

And that's three tracks aligned in , ready for ballast
Final adjustments to connect the Rail Motor dock and the platform road. Then connect up all the power leads and point motors. polarity changes done electronically, and point motors only change points.

Third job was to adjust the Led lighting and add a couple more supports then trim off the zip ties

Taken before adjustments and with flash

Without flash. I am happy with light level. I am not a fan over over lighting my scenes.
So far so good

More soon